Motor Mounting Position as Standards

 

CENTRIFUGAL FANS ARE RECOMMENDED BY DRIVE TYPE

Direct Drive

V-Belt Drive

Coupling Drive


EXTRA FEATURES FOR BLOWERS

Available Drives

Impeller directly on motor shaft & driven by motor Impeller Overhung on shaft supported between bearing driven by v-belts/coupling Impeller mounting on shaft center between bearings drives by v-belts/coupling.

Accessories

Common channel base for motor & blower, Motor & Blower Pulleys, V-belt, Damper, Expansion Bellow, Motor Slide rails, Belt guard, Induction Motor Standard/FLP.

Optional Accessories

Gland seal, Heat slinger fan, Vibration Isolators, Acoustic insulation, Inlet/Outlet Manual single/multi leaf dampers, Airfoil design High Efficiency Impellers.

Impeller Balancing

Dynamically balanced to ISO: 1940-1:2003(E) IS-11723 (Part-1) 1992 Grade 6.3

Available M.O.C

Mild Steel, Stainless Steel (In case Any Specific requirement can be entertain on specific inquiry.)